Keating-of-chicago Filter System Thermostat Bedienungsanleitung PDF herunterladen (Seite 1)

www.keatingofchicago.com 1-800-KEATING

SERVICE INSTRUCTIONS

7/98

VkngRbltPmp

VIKING REBUILT PUMP KIT

A. To Replace “O” Rings (refer to exploded view)

1. Remove 4 bolts #8. The housing will come apart. Replace “O” rings making sure the

“O” ring is in the groove in the housing.

B. To Replace Lip Seal

1. The lip seal is located in the bracket Item #1. Using a flat blade screwdriver, knock

out the old lip seal. CAUTION: Be careful not to damage the bearings.

2. Using an Arbor Press, press the new lip seal into the bracket #1.

3. Replace all sections of the pump making sure none of the “O” rings are pinched

between the sections.

4. Tighten down the 4 bolts by alternating between them.

ITEM DESCRIPTION

1 Bracket, lipseal & bearing section

2 Match ground casing & (2) gears, driver & driven shafts

3 Separation plate & bearing assembly

4 Head and alignment sleeve assembly

6 Lipseal

7 O-ring

8 Assembly capscrews

Typical SG-07

Exploded View

SERVICE INSTRUCTIONS 1

Inhaltsverzeichnis

Seite 1 - SERVICE INSTRUCTIONS

www.keatingofchicago.com 1-800-KEATINGSERVICE INSTRUCTIONS7/98VkngRbltPmpVIKING REBUILT PUMP KITA. To Replace “O” Rings (refer to exploded view)1. Rem

Kommentare zu diesen Handbüchern

Keine Kommentare

Keating-of-chicago Filter System Thermostat Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Schalttafel Keating-of-chicago Filter System Thermostat herunter. Keating Of Chicago Filter System Thermostat User Manual [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern