Keating Of Chicago pre 2000 series Bedienungsanleitung PDF herunterladen

OCT’97

BEthermCal

THERMOSTAT CALIBRATION INSTRUCTIONS

(pre 2000 series Gas Fryers)

SERVICE INSTRUCTIONS

www.keatingofchicago.com 1-800-KEATING

You will need:

One standard flat blade screwdriver

One accurate fryer thermometer

1. Set thermostat to desired frying temperature.

2. Allow fryer to cycle three times.

3. Place an accurate thermometer in the oil.

NOTE: Locate thermometer in same position for every calibration.

Position next to far right heat tube is recommended.

Thermometer in oil

4. If calibration of fryer is found to be less than 15°F off, simply

loosen three dial plate retaining screws, rotate dial plate to

match thermometer reading and tighten screws.

Thermostat calibration

If the fryer is found to be more than 15° off, than a qualified service

company must be contacted to have the fryer properly calibrated.

SERVICE INSTRUCTIONS 1

Inhaltsverzeichnis

Seite 1 - SERVICE INSTRUCTIONS

OCT’97BEthermCalTHERMOSTAT CALIBRATION INSTRUCTIONS(pre 2000 series Gas Fryers)SERVICE INSTRUCTIONSwww.keatingofchicago.com 1-800-KEATINGYou will need

Kommentare zu diesen Handbüchern

Keine Kommentare

Keating Of Chicago pre 2000 series Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Elektrische Wandplatten Keating Of Chicago pre 2000 series herunter. Keating Of Chicago pre 2000 series User's Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern